横向气流对空心锥形喷雾液滴群的夹带特性

doi:10.13675/j.cnki. tjjs. 180410

推进技术 ›› 2019, Vol. 40 ›› Issue (8): 1792-1798.DOI: 10.13675/j.cnki. tjjs. 180410

横向气流对空心锥形喷雾液滴群的夹带特性

1.西安交通大学化工学院;2.西安交通大学动力工程多相流国家重点实验室，陕西西安;710049

发布日期:2021-08-15
作者简介:王璞，硕士生，研究领域为气液两相流掺混强化。E-mail：abcvictory15@stu.xjtu.edu.cn
基金资助:
国家自然科学基金 51876167 51306146国家自然科学基金（51876167；51306146）。

Entrainment Characteristics of Hollow Cone SprayDroplets in Crossflow

1.School of Chemical Engineering and Technology,Xi’an Jiaotong University,Xi’an 710049,China;2.State Key Laboratory of Multiphase Flow in Power Engineering,Xi’an Jiaotong University,Xi’an 710049,China

Published:2021-08-15

摘要/Abstract

摘要： 空心锥形喷雾与横向气流的掺混是强化气液掺混的一种重要方式，目前对这一过程尚缺乏深入研究。为了研究横向气流对空心锥形喷雾射流液滴群的夹带特性，采用PIV可视化技术对掺混流场进行测量。结果表明：空心锥形喷雾与横流的相互作用在气流流向方向上诱导出现明显的剪切层及不稳定涡结构，对雾化液滴的扩散产生重要影响并引起液滴在剪切层区域的富集。在分析横流雷诺数、喷雾液滴雷诺数与液滴数流率对掺混流场剪切层结构影响规律的基础上，基于量纲分析和回归分析方法，建立了空心锥形喷雾与横向气流掺混流场中剪切层轨迹线的无量纲预测关联式。

关键词: 空心锥形喷雾;横向气流;剪切层轨迹;预测关联式

Abstract: The interaction of hollow cone spray and crossflow is an important way to enhance the mixing of gas and liquid, but there is rare research to clarify the mechanism of this motion. Adapting PIV system, the characteristics of shear layer and droplet dispersion of hollow cone spray in crossflow were investigated. The results show that shear layer and unsteady vortex structure are induced in the direction of flow field, enhancing the diffusion of droplets and causing the concentration of droplets in the shear layer region. Three parameters including crossflow Reynolds number, droplet Reynolds number and flow rate of droplet quantity directly affect the shear layer structure in the mixing flow field. With dimensional and regression analysis, a predictive correlation for shear layer trajectories in mixing flow field is developed.

Key words: Hollow cone spray;Crossflow;Shear layer trajectory;Predictive correlation

. 横向气流对空心锥形喷雾液滴群的夹带特性[J]. 推进技术, 2019, 40(8): 1792-1798.

参考文献

[1] Becker J, Hassa C. Breakup and Atomization of a Kerosene Jet in Crossflow at Elevated Pressure[J]. Atomization and Sprays， 2002， 12(1-3): 49-67.
[2] Sharp J G. Effects of Fuel Type on the Performance of Aero Gas Turbine Combustion Chambers， and the Influence of Design Features[J]. Journal of the Royal Aeronautical Society， 2016， 58(528): 813-825.
[3] Fuller R P， Wu P K， Nejad A S， et al. Comparison of Physical and Aerodynamic Ramps as Fuel Injectors in Supersonic Flow[J]. Journal of Propulsion and Power， 1998， 14(2): 135-145.
[4] 杨亚晶，何茂刚，徐厚达. 水冲压发动机的热力循环性能预示[J]. 推进技术， 2009， 30(4): 474-478. （YANG Ya-jing， HE Mao-gang， XU Hou-da. Thermodynamic Cycle Performance for Water Ramjet Motors[J]. Journal of Propulsion Technology， 2009， 30(4): 474-478.
[5] 芮常胜，张超，越冬峰. 射流预冷涡轮发动机技术研究及发展[J]. 航空科学技术， 2015， 26(10): 53-59.
[6] 商旭升，王远，吴朝晖. 喷水预冷却发动机与导弹一体化设计[J]. 推进技术， 2013， 34(6): 721-727. （SHANG Xu-sheng， WANG Yuan， WU Zhao-Hui. Integrated Design for Missile and Jet Pre-Cooling Engine[J]. Journal of Propulsion Technology， 2013， 34(6):721-727.）
[7] Sallam K A， Aalburg C， Faeth G M. Breakup of Round Nonturbulent Liquid Jets in Gaseous Crossflow[J]. AIAA Journal， 2004， 42(12): 2529-2540.
[8] Wu P K， Kirkendall K A， Fuller R P， et al. Breakup Processes of Liquid Jets in Subsonic Crossflows[J]. Journal of Propulsion and Power， 1997， 13(1): 64-73.
[9] Leong M Y， Mcdonell V， Samuelsen G S. Effect of Ambient Pressure on an Airblast Spray Injected into a Crossflow[J]. Journal of Propulsion and Power， 2001， 17(5): 1076-1084.
[10] Sinha A， Prakash R S， Mohan A M， et al. Airblast Spray in Crossflow-Structure， Trajectory and Droplet Sizing[J]. International Journal of Multiphase Flow， 2015， 72(5):97-111.
[11] Marchione T， Allouis C， Amoresano A， et al. Experimental Investigation of a Pressure Swirl Atomizer Spray[J]. Journal of Propulsion and Power， 2007， 23(5):1096-1101.
[12] Santolaya J L， Aísa L A， Calvo E， et al. Analysis by Droplet Size Classes of the Liquid Flow Structure in a Pressure Swirl Hollow Cone Spray[J]. Chemical Engineering and Processing Process Intensification， 2010， 49(1): 125-131.
[13] Nonnenmacher S， Piesche M. Design of Hollow Cone Pressure Swirl Nozzles to Atomize Newtonian Fluids[J]. Chemical Engineering Science， 2000， 55(19): 4339-4348.
[14] Rashad M， Huang Y， Zheng Z. Effect of Geometric Parameters on Spray Characteristics of Pressure Swirl Atomizers[J]. International Journal of Hydrogen Energy， 2016， 41(35): 15790-15799.
[15] Lee S， Kim W， Yoon W. Spray Formation by a Swirl Spray Jet in Low Speed Cross-Flow[J]. Journal of Mechanical Science and Technology， 2010， 24(2): 559-568.
[16] Nouri J M， Whitelaw J H. Gasoline Sprays in Uniform Crossflow[J]. Atomization and Sprays， 2007， 17(7):621-640.
[17] Prakash R S， Gadgil H， Raghunandan B N. Breakup Processes of Pressure Swirl Spray in Gaseous Cross-Flow[J]. International Journal of Multiphase Flow， 2014， 66(9):79-91.
[18] Ghosh S， Hunt JCR . Spray Jets in a Cross-Flow[J]. Journal of Fluid Mechanics， 1998， 365(12): 109-136.
[19] Deshpande S S， Gao J， Trujillo M F. Characteristics of Hollow Cone Sprays in Crossflow[J]. Atomization and Sprays， 2011， 21(4): 349-361.
[20] Zhang H B， Bai B F， Liu L， et al. Mixing of Hollow-Cone Spray with a Confined Crossflow in Rectangular Duct[J]. AIAA Journal， 2013， 51(3): 615-622.
[21] 张海滨，白博峰，刘利，等. 受限空间内空心锥形喷雾-横流掺混规律[J]. 化工学报， 2012， 63(5): 1354-1359.
[22] Zhang H B， Bai B F， Liu L， et al. Droplet Dispersion Characteristics of the Hollow Cone Sprays in Crossflow[J]. Experimental Thermal and Fluid Science， 2013， 45(2): 25-33.
[23] Zhang H B， Bai B F， Liu L， et al. Experimental Study of the Mixing of Two Impinging Pressure-Swirl Sprays in Crossflow[J]. Experimental Thermal and Fluid Science， 2013， 49(6): 67-74.
[24] Zhang H B， Bai B F， Wang Y C. Quantitative Description of Droplet Dispersion of Hollow Cone Spray in Gaseous Crossflow[J]. Experimental Thermal and Fluid Science， 2018， 93(4): 398-408.

横向气流对空心锥形喷雾液滴群的夹带特性

Entrainment Characteristics of Hollow Cone SprayDroplets in Crossflow

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价